Research connecting computing, power and thermal management

This study proposes a scalable Digital Twin framework for energy optimization in data centers.The framework integrates IoT-based data acquisition, cloud computing, and machine learning techniques to enable real-time monitoring, forecasting, and intelligent energy management. A controlled small-scale data center environment was developed to monitor variables such as power consumption, temperature, and computational workload. Long Short-Term Memory (LSTM) models were employed to predict energy demand and support operational decision-making. Experimental results demonstrated improvements in energy efficiency, including reductions in power consumption and enhancements in Power Usage Effectiveness (PUE). Despite being evaluated in a constrained environment, the proposed framework demonstrates strong potential as a scalable and cost-effective solution for sustainable data center management.

AI data centers are increasingly becoming tightly coupled compute--energy systems, where workload placement, cooling demand, electricity procurement, storage operation, and carbon emissions interact over time. This paper studies carbon-aware compute--power scheduling for geographically distributed AI data centers with microgrid prosumer capabilities. We propose a mixed-integer linear programming (MILP) framework that jointly schedules rigid training jobs, routes elastic inference workloads, dispatches local generation and battery storage, and manages bidirectional grid interaction under latency, continuity, power-balance, and carbon-budget constraints. The model captures two key features of emerging AI infrastructure: heterogeneous workload flexibility and site-level energy prosumer operation. Experiments on synthetic yet practically motivated instances show that the proposed joint MILP substantially improves total operational benefit over compute-only and energy-only baselines while reducing emissions. The results further indicate that inference-routing flexibility is a major source of value, battery storage provides useful temporal flexibility, and local-generation-rich settings are particularly favorable. The framework provides a tractable optimization abstraction for sustainable and grid-interactive AI data centers.

A framework is established that assesses the impact of variations in artificial intelligence (AI) data center (DC) loads on the fatigue damage of steam/gas turbines of the synchronous generators (SGs) from torsional oscillations. Next, a simple three-step process that is supported by frequency-domain analysis is laid out to quantify the limits on fluctuations in AI DC loads. In the first step, the maximum allowable variation in electrical power output at each SG terminal is independently determined from the first principles. This step needs only a lumped multi-mass model of the mechanical side of the SG. In the second step, we propose a new approach that relies on load flow to determine the so-called algebraic `interaction factor' that maps the change in AI DC load at a given bus to the corresponding change in each of the SG power outputs. In the third step, we propose a screening method to rank the candidate buses to site AI DCs and solve an optimization problem to determine the optimal allowable fluctuations in the AI DCs. We demonstrate the applicability of the proposed approach through frequency-domain and time-domain analyses in the modified IEEE 4-machine and IEEE-68 bus systems using a dynamic phasor framework. Finally, we demonstrate the scalability of the proposed approach on the synthetic 2000-bus Texas system.

Modern language model development extends far beyond pretraining, yet environmental reporting remains narrowly focused on the cost of training a single final model. In this work, we provide the first detailed breakdown of the environmental impact of a full model development pipeline, from pretraining through supervised fine-tuning, preference optimization, and reinforcement learning, for Olmo 3, a family of 7 billion and 32 billion parameter models in both instruction-following and reasoning variants. We find that reasoning models are 17x more expensive to post-train than their instruction-tuned counterparts in terms of datacenter energy, driven by reinforcement learning rollout generation. Development costs (including experimentation, failed runs, and ablations) account for 82.2% of total compute, a roughly 65% increase over the ~50% reported for pretraining-focused pipelines in prior work. In total, we estimate our model development process consumed ~12.3 GWh of datacenter energy, emitted 4,251 tCO2eq, and consumed 15,887 kL of water, with water consumption driven entirely by power generation infrastructure rather than data center cooling. These costs, which are almost entirely unreported by model developers, are growing rapidly as post-training pipelines become more complex, and must be accounted for in environmental reporting standards and by the research community working to reduce AI's environmental impact.

In this paper, we consider the expansion of power grids under emerging large loads from data centers and electrified manufacturing. We develop a multi-period grid capacity expansion model to determine optimal investment profiles for power generation, storage, and transmission capacity while accounting for hourly power dispatch, such that electricity demand is satisfied and the total planning and operation cost is minimized. We also propose a new modeling approach regarding the spatial distribution of demand from large loads. The model is used to analyze the expansion of a synthetic grid that follows key characteristics of the ERCOT system over a seven-year planning horizon, under loads from data centers and electrified oil refining, which account for 17.5% and 4.7% of total annual electricity demand by the end of the planning horizon. The optimal investment policy leads to an 83.6% increase in generation capacity and exploits the short construction times of solar and storage as well as the operational flexibility of thermal generators. Finally, sensitivity analysis reveals that the construction time of grid assets substantially impacts investment timing, generation technology mix, and transmission capacity expansion. The proposed modeling framework is general and can be extended to other grid systems, enabling the exploration of diverse demand scenarios, policy assumptions, and regional characteristics.

At global scale, data-center electricity demand is growing faster than the grids that supply it, while system operators increasingly require large flexible loads that can adjust power within seconds to absorb variable wind and solar generation. For multi-megawatt AI/HPC facilities, the key unresolved question is practical and measurable: how quickly can the software stack translate a grid request into a real change in GPU power at the facility meter, where commitments are settled? We answer this on real hardware with GridPilot, a three-tier predictive controller operating across milliseconds, seconds, and hours, augmented by a deterministic safety-island bypass for fast response. On a three-GPU NVIDIA V100 testbed, GridPilot achieves a measured end-to-end trigger-to-target response of 97.2 ms, which is 6.9x faster than the 700 ms requirement of Nordic Fast Frequency Reserve. We further incorporate an instantaneous Power Usage Effectiveness (PUE) correction so dispatched commitments remain robust at meter level rather than only at IT load level. In replay experiments across six representative European grids (from Sweden to Poland), the PUE-aware controller closes 2.5-5.8 percentage points of cooling-overhead drag. GridPilot is released as open source and serves as a proof of concept that MW-scale AI/HPC demand can be engineered as controllable, grid-responsive flexibility by design.

High-Performance Computing (HPC) has recently entered the Exascale era, and considerable efforts are being made to fully harness this potential power for large-scale applications, such as cutting-edge generative AI (training and exploitation). The corresponding energy consumption is very high, and forecasts are alarming, making this metric a critical systemic bottleneck. Addressing this issue presents a genuine challenge for the entire cloud-edge-HPC continuum at all scales, from low-power IoT microcontrollers to multi-megawatt data centers. Beyond financial costs, green computing is driven by considerations related to climate change and environmental concerns such as carbon footprint ($CO_2e$), as well as constraints on energy production and supply, leading to a real need to regulate {\em information and communication technology} (ICT) activities. This article presents a comprehensive overview of energy-efficient computing, taking into account the most recent and significant contributions. Based on this exploration of the state of the art, we design and describe a holistic taxonomy of the aforementioned publications, structured around various perspectives, including {\em hardware and software aspects, measurement instrumentation, software optimizations, dynamic task scheduling, voltage scaling, workload consolidation, federated learning}, and {\em cooling}. Particular emphasis is placed on large-scale AI, which receives significant attention due to its considerable resource requirements. We conclude with an analysis of a forward-looking roadmap that considers the main perspectives of sustainable computing.

The rapid scaling of large language model training requires distributing GPU resources across multiple data center buildings and regions. We refer to such paradigm as "scale-across" training. As infrastructure expands, the system design space becomes increasingly intricate, encompassing new model architectures, hardware heterogeneity, and evolving communication patterns. Drawing from Meta's production experience, we highlight the complexities of deploying training jobs across a few data centers housing hundreds of thousands of GPUs. To accelerate exploration of the large design space and to enable efficient training for frontier model development, we conduct in-depth characterization of three key design dimensions: parallelism placement, parallelism scheduling, and network layer technologies. We then propose ScaleAcross Explorer, an optimizer that considers the interplay of design dimensions and holistically optimizes scale-across training. Testbed experiments and simulations demonstrate up to 64.62% training speedups over production configuration and up to 37.59% training speedups over the state-of-the-art baseline across a wide range of design points.